On Macs, multi-touch is similar to that of the Apple Magic Trackpad. Basic gestures such as pan, scroll, zoom and rotate all work on the Cintiq 27QHD touch. Although Windows® 7 and Windows 8 supports... more
FAQ
-
-
In supporting applications digital canvas rotation combined with multi-touch allows the user to not only rotate, but also to quickly switch to panning and zooming the canvas. In addition, when using... more
-
The products look the same except for the upper right button of the Cintiq 27QHD touch which differs from the Cintiq 27QHD. It is used to turn multi-touch on and off instead of to access the “Wacom... more
-
Normally the USB 3.0 cable should be used to connect Cintiq to the host computer. Some computers and USB 3.0 hubs generate interference which can reduce the operating distance of the ExpressKey... more
-
The ExpressKey Remote comes pre-paired from the factory with an RF receiver. You can find it inside the left hand side compartment on the back. There is normally no need to remove the receiver... more
-
Cintiq 27QHD uses a software utility called Wacom Display Settings which was installed on your computer when you loaded the driver. You can launch it from the Wacom Desktop Center.
-
Cintiq 27QHD supports the following display connections: · DisplayPort – provides full QHD 2560x1440 resolution. Mini-DisplayPort is supported with the... more
-
Cintiq® 27QHD models are our most productive and ergonomically designed Cintiqs yet. Compared to the Cintiq 24HD, the Cintiq 27QHD is improved in the following ways: Larger 27” display but... more
-
If the blue LED is blinking, reconnect to the app with the internal pairing process. If the LED is not on and the stylus is not working correctly, reconnect to the app according to the instructions... more
-
As only supporting apps have the ability to properly correct this gap, please make sure that you are using a supporting app. If you use non- supporting apps, you can minimize this effect by holding... more
-
Please first check that the battery is charged. Secondly, check that Bluetooth is enabled on your iPad and activated in your pen. Make sure that you are placing your fingers in the grip area, and... more
-
To replace the nib, please open the stylus case first. The built-in nib removal tool is a small metal-framed hole in the bottom of the case. Plug the pen tip into this hole, tilt the stylus slightly... more
-
The new material of the nib is very durable and long-lasting. You can draw more than 100 km of lines with it on an iPad screen. We have added one replacement nib to the stylus case for extra... more
-
The LED lights give you the status of your stylus, informing about pairing, connecting or a low battery. There are two colors, blue and red, and the lights can either be on or blink. Here is an... more
-
The side switches work as short-cut buttons. In most apps, you can select from a range of functions that can be assigned to each of the side switches: e.g. in Bamboo Paper, you can chose between... more
-
Palm rejection allows you to naturally rest your palm comfortably on the iPad screen while drawing. Without this feature, your palm would leave stray marks on the canvas in an app. Palm rejection is... more
-
The stylus is switched on automatically when pressure is applied to the stylus pen tip. If you need to pair it with a supporting app, simply press one of the side switches. After 10 minutes without... more
-
When the battery capacity of the Intuos Creative Stylus 2 reaches about 15%, the LED on the stylus starts to blink red. In this case, you need to recharge. 1. Remove the cap at the top end of... more
-
Your Intuos Creative Stylus 2 uses a rechargeable lithium-ion battery. By using the low energy feature of Bluetooth® Smart technology, the Intuos Creative Stylus delivers approximately 26 continuous... more
-
No, devices with Windows 8 and Android operating systems are not compatible with the Intuos Creative Stylus 2. You can use a Bamboo Stylus feel for a precise and extremely natural writing... more